Phone Number
+91 7982861686

Company Contact Information

  • 16-Community Center, 3rd Floor, East of Kailash, New Delhi-110065, India
  • +91 7982861686

Social Media

FEUBOND 5187 – Non Flammable Adhesive

FEUBOND 5187 – Non Flammable Adhesive

FEUBOND 5187 is a special grade non-flammable, low VOC synthetic rubber-based adhesive. This product is designed to provide excellent adhesion, good tack retention time, and higher coverage. It is recommended for bonding various substrates like glass wool, Rockwool, Nitrile Rubber, XLPE, and EPDM insulation on Air conditioning Ducts & Pipes. FEUBOND 5187 is tested for LOW VOC requirements as per ASTM D 2369. Also, it conforms to the requirements of ASTM D 3278 and is classified as a non-flammable adhesive.  

FEUBOND 5187 meets the requirements of VOC emissions and content requirements to contribute to LEED v4 EQ Credit: Low emitting adhesive. It is recommended to be used in Green Building & Environment-friendly projects.


    • Fire Safe (non-flammable) 
    • Excellent tack retention time  
    • Good chemical & thermal resistance 
    • Benzene Free 
    • Brushable  
    • Low VOC 


    • Duct Insulation 
    • Pipe Insulation 
    • Underdeck Insulation 

Coverage area:6-8 sqm/Liter 

Technical Specification: 



              Test Method 





Light Brown, viscous liquid 

Density at 30°C 




Viscosity at 30°C 

   c Ps 

    ASTM D 2196 


Solid Content 



25 % 

Wet Flammability 


 ASTM D 3278 




   ASTM D 2369 


Tack Retention Time 




Tack retention time (open time) is generally measured after evaporation of solvent once the adhesive is applied to a thin film. It may vary depending upon ambient temperature and humid conditions. 

PROCESS OF APPLICATION: Surface preparation: Ensure that substrates to be bonded are clean, dry, and free from oil, grease, and foreign particles such as dust and rust.

APPLICATION METHOD: Stir the adhesive well and make it homogeneous before use. Apply adhesive uniformly in a thin layer on a single side of substrates to be bonded with a brush, spatula, or any suitable tool. Allow evaporation of solvents from the adhesive layer to develop tack. The evaporation of solvent may take 5 minutes to 10 minutes, which depends upon ambient temperature and humidity. In case of an absorbing substrate, apply a second coat and allow drying for 5 minutes to 10 minutes.  

PACKAGING: FEUBOND 5187 is available in 5 LTR and 25 LTR MS drums. Another packing may be considered on request. 

STORAGE AND HANDLING: FEUBOND 5187 should be stored in a cool and dry place away from moisture, and direct sunlight. FEUBOND 5187 is non-flammable and classified as fire safe. This product has a shelf-life of 1 year if stored in its original container between 2°C and 40°C away from humidity and excessive heat. Please refer to the Material Safety Data Sheet (SDS) for detailed instructions on storage and handling. 

SAFETY: Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, it should be washed off immediately with soap and warm water. Proper ventilation must be provided to the shop floor where adhesive is used. Avoid breathing vapors, mist, or gas. Please refer to the MSDS for detailed safety instructions. 

Call Us Now
+91 7982861686